How to Store and Display Your GAMER V CLASSIC TRAY - 12 PCS Collection

Quick answer

Keep the 12-piece tray intact as your storage and display system: leave each unit in its retail slot when not in use, then pull one or two forward for play. Store the tray on a stable, dry shelf out of direct sun, and wipe plastic and screens with a dry microfiber cloth. This keeps the set organized, dust-free, and ready to grab without repacking loose handhelds.

A 12-piece tray is already a display and storage solution, so the goal is not to hide it in a closet. It is to give the tray a permanent, safe home where the units stay upright, visible, and easy to remove one at a time. That approach protects screens, prevents tangled accessories, and makes the collection look intentional rather than scattered.

The steps below cover unboxing, placement, screen and shell care, and a rotation routine that keeps every unit playable. They apply whether you are setting up a GAMER V CLASSIC TRAY - 12 PCS collection for a game room, a retail counter, or a gift that needs to stay tidy between sessions.

Start with the tray as your storage base

Before you move anything, decide where the tray will live. A 12-piece display tray is designed to hold each unit in its own slot, so the tray itself becomes the storage organizer. Choose a shelf, counter, or cabinet that is wide enough for the full tray and deep enough that no unit overhangs the edge. A stable surface matters more than a stylish one, because a tray that gets bumped can send handhelds sliding.

If the tray will sit on a retail counter or a shared table, mark its footprint with painter's tape first. This prevents the common mistake of placing it, then discovering the power cables or a nearby object force you to shift it repeatedly. Once the footprint is right, set the tray down and leave it there.

• Checkpoint: the tray sits flat with no wobble and all 12 slots are accessible without moving the tray.
• Avoid placing the tray on a sloped surface or directly under an air vent, where dust and temperature swings are constant.

Unbox and inspect each unit before it goes in the slot

Take the units out one at a time and confirm each one is complete before returning it to the tray. Look for the screen, buttons, and battery compartment, and check that no unit has a cracked shell or a loose battery door. This is also the moment to remove any protective film from the display, because film left on a screen collects dust at the edges and looks cloudy under light.

A common mistake is opening all 12 units at once and mixing up any inserts or accessories. Keep the tray slots empty until each unit has been checked, then place it back in the same slot. If a unit needs batteries, install them now rather than later, so you are not searching for a screwdriver while the collection is half unpacked.

• Checkpoint: every unit powers on or shows a screen response before it is stored.
• If a unit does not respond, test the batteries in another device before assuming the handheld is faulty.

Choose a display position that protects screens

Screens are the most fragile and most visible part of any handheld, so position the tray where light hits the shells rather than the displays. Direct sun can wash out a screen and heat the plastic, and a bright window behind the tray makes every display look dim. A shelf at chest height or slightly below eye level lets you see the collection without handling it constantly.

For classic tray display ideas, group the tray with related items rather than surrounding it with loose cables and boxes. A clean background makes the 12 units read as one set. If you want a retail-style look, keep the tray at the front edge of the shelf and leave the space behind it empty for easy dusting.

• Checkpoint: no screen faces a window or a direct lamp.
• Keep the tray away from kitchen counters, bathrooms, and anywhere humidity changes quickly.

Set a cleaning routine for the tray and units

Dust is the main enemy of a displayed collection. Once a week, run a dry microfiber cloth over the tray surface and the top of each unit. For the screens, use a dry cloth only, or a cloth lightly dampened with water if the manufacturer allows it. Never spray cleaner directly onto a screen or into button gaps, because liquid can reach the electronics.

For display tray care, pay attention to the slots themselves. Dust settles in the bottom of each slot and can transfer to the back of a unit when you slide it in. Tip the tray gently over a bin, or use a soft brush, every few weeks. This is also the time to check that no unit is sitting at an angle, which can stress the shell over time.

• Checkpoint: no visible dust on screens or in slot corners after cleaning.
• Do not use paper towels on screens, as they can leave lint and fine scratches.

Rotate units so every game stays playable

A 12-piece collection can easily become 11 decorations and one favorite handheld. To avoid that, pick two or three units to keep at the front of the tray each month and rotate the rest to the back. This spreads wear on buttons and battery contacts and keeps you honest about which units still hold a charge or need fresh batteries.

If a unit uses disposable batteries, remove them before long storage to prevent leaks. If it uses a rechargeable battery, top it up to roughly half charge rather than leaving it full or empty for months. A simple label on the back of the tray with the rotation date saves you from guessing later.

• Checkpoint: every unit has been powered on at least once in the last 90 days.
• Store spare batteries in a small box next to the tray, not loose in the slots.

Move or travel with the tray safely

If the tray has to move, treat it as one packed unit rather than carrying loose handhelds. Remove any units that stick out, place a soft cloth or foam sheet over the screens, and support the tray from the bottom. A common mistake is lifting a loaded tray by one corner, which flexes the tray and can drop units out of their slots.

For longer trips, put the whole tray in a box with padding on all sides, or transfer the units to a padded case and leave the tray at home. When you return, inspect each unit before sliding it back in, because a drop or a tight packing job can loosen a battery door or scratch a screen.

• Checkpoint: the tray does not flex when you lift it with both hands.
• Never stack heavy items on top of a loaded display tray.

Your 12-piece tray setup, step by step

1. Pick and mark the tray's permanent spot: Choose a stable, dry shelf or counter that fits the full tray with room to slide units in and out. Mark the footprint with tape, then set the tray down and confirm it does not wobble. Checkpoint: all 12 slots are reachable without moving the tray.
2. Unbox and test one unit at a time: Remove each handheld, check the shell, screen, buttons, and battery door, and install batteries if needed. Return each unit to its slot before opening the next one. Checkpoint: every unit powers on or shows a screen response before storage.
3. Position the tray away from sun and heat: Face the screens away from windows and lamps, and keep the tray off sloped or vibrating surfaces. Leave the space behind the tray clear for cables and dusting. Checkpoint: no screen catches direct light.
4. Clean the tray and screens weekly: Wipe the tray and unit shells with a dry microfiber cloth. Use a dry cloth on screens, and clear dust from the slot bottoms with a soft brush or by tipping the tray over a bin. Checkpoint: no dust in slot corners and no liquid near button gaps.
5. Rotate two or three units to the front each month: Move the units you have not played to the front and return the previous favorites to the back. Remove disposable batteries from units going into long storage, and top up rechargeable batteries to about half charge. Checkpoint: every unit has been powered on in the last 90 days.
6. Move the tray as one packed unit: Cover the screens with a soft cloth, support the tray from the bottom with both hands, and never lift it by one corner. For travel, box the tray with padding on all sides or move the units to a padded case. Checkpoint: the tray does not flex when lifted.

Product facts that shape your setup

• TETRIS PIXEL POCKET PLAYER (11 GAMES IN 1) TRAY -12 PCS: Includes 12 pcs. of DGUNL-7083 in a countertop point-of-purchase retail display tray; powered by 3 AAA batteries (not included). Because batteries are not included, plan to buy 36 AAA cells for all 12 units if you want every handheld ready to play, and keep the tray as the shared storage base.
• TETRIS POCKET PLAYER PRO TRAY -15 PCS: Includes 15 pcs. of DGUNL-7028 with a high resolution 2.75-inch full color display, built-in speaker with volume control, 3.5 mm headphone port, adjustable screen brightness, and power by either 4 AA batteries (not included) or USB-C. The USB-C option means you can avoid disposable batteries for daily play, but you still need a clear route for the cable, so leave space behind the tray rather than pushing it against a wall.
• Tetris Nano Player Pro: My Arcade's latest version of the iconic puzzle game offers a smooth gaming experience with a user-friendly interface and is described as a must-have addition for any gaming enthusiast's collection. A single-unit handheld like this is a good candidate for a front slot or a separate small stand, so it does not get lost among the larger tray pieces.
• Atari Gamestation Pro: Atari is a pioneer in the video game industry, founded in 1972, with iconic games including PONG, Breakout, and Asteroids. If your collection includes a console-style unit like this, keep it on its own shelf or beside the tray rather than inside a handheld slot, so cables and controllers stay organized.

A 12-piece tray works best when it stays in one place and you rotate what you play. Set the tray on a stable, shaded surface, test each unit before it goes back in its slot, and keep a simple weekly dusting routine. That is enough to keep a GAMER V CLASSIC TRAY collection organized, visible, and ready for the next game.